Frame: made of carbon steel after heat treatment.The axles installed on both sides of the cradle are supported by bearings, and the frame is fixed to the ground with expansion screws (expansion)The screws are within the range we provide), and the adjustable bolts are adjusted to the level.Rotating shaft: adopt 2 steel structure bracket to connect two bow belt design, energy saving, noiseLow. The shaft is mounted in a high-precision bearing and can pass through an external nozzle while the machine is running.
Lubricated with oil, the shaft is mounted on a movable cast iron frame. The movement of the shaft is through the transverse drive shaft.Over synchronous belt and synchronous belt wheel transfer. Each shaft has a wire wheel (made of high-resistance aluminum alloy), the conducting wheel has a ceramic coating in the groove (sometimes the integral ceramic zirconia guide wheel is also used).The high-speed rotating conductor wheel is mounted on the shaft outside the flange with a titanium pin shaft.
To prevent the effect of wind, the inner bearings are lubricated with grease.Ac main motor: connected to the transverse drive shaft through a coupling and driven to the bow belt. By hand in The motor of 55KW is transferred to the traction wheel to adjust the speed of the main motor and the traction wheel.Speed difference to adjust the pitch size of the stranded line, fully realize the electronic pitch control and adjustment.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.