HONTA focus on wire drawing machine and other wire machine since 2006. Pursue excellence, surpass ourselves.  Make Chinese wire machine serves world.

Home   |   Products   |   Pay Off and Take Up Machine   |  

630mm and 800mm pay off machine

这里可以自定义设置
630mm and 800mm pay off machine
Pay off unit
Motorised pay off Motorised pay off Passive pay off
MOQ:
1set
Payment:
TT & LC
Place of Origin:
JiangSu, China
Cetification:
CE
Delivery Time:
30 days
Sercice:
7*24H
Brand
HONTA China
Motor &PLC&HMI
Siemens China
Bearing
SKF
参数暂无数据

Add success, do you want to check your shopping cart?

暂无分享

 

Machine type

HT.DMF630

HT.DMF800

Conductor cross section

0.50-2.50mm2

Conductor dia.

0.10-0.50mm

Pay off speed

Max.300m/min

Motor power

1.5Kw AC *2

3.5Kw AC *2

Bobbin size

630mm

800mm

Max. loading capacity

600KG

1000KG


这里可以自定义设置

Product Introduction

The double head active pay-off frame is mainly composed of pay-off frame body body, taking-off shaft, belt pulley, passing roller, inside and outside head dividing board, broken wire induction rod, etc.

Machine frame: welded by steel plate (Q235A), annealed to eliminate internal stress, then processed by precision milling machine. Frame can be fixed to ground with expansion screws.

 

The drum is used to pass wire or cable to the tension mechanism. Synchronizing the cable and the motor (pay-off and winder) through the tension mechanism of the pay-off and the following components: an inclined swing rod (supporting the wire wheel) is controlled by a cylinder and is completed by a pressure regulating valve and pressure gauge (output through filters and lubricators - as required by the customer). Adjust the rising speed through the cylinder limit valve to adjust the air flow of the cylinder, so as to control the rising speed of the support plate. An automatic stop device implemented by a proximity switch (when a wire or cable is broken). The motor speed is controlled by a proximity switch, a CAM sensor at the pendulum fulcrum and a logic switch in the electrical box.

 

The electrical control panel is mounted in the box and fixed to the machine. The window next to it ensures the air circulation and is well protected.

Product Parameters

Machine type

HT.DMF630

HT.DMF800

Conductor cross section

0.50-2.50mm²

Conductor dia.

0.10-0.50mm

Pay off speed

Max.300m/min

Motor power

1.5Kw AC *2

3.5Kw AC *2

Bobbin size

630mm

800mm

Max. loading capacity

600KG

1000KG

这里可以自定义设置

Leaving a Message

社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time. Company email:tlc@kshonta.com,tina.tian@jshonta.com