Door-frame Wire Setting Copper Wire Manufacturing Process

This equipment is a related product of our winder and it consists of the following components.The welder frame can be fixed to the ground with impact screws (expansion screws are not included in the parts we provide);The hand movement center has a safety locating pin controlled by a micro switch;Transmission of power to fixed center through reducer;Brake resistance (controlled by frequency converter).The disassembly reel is completed by the reel support plate (so that the reel can be easily removed from the fixed center);

Lifting action is through the air valve control two cylinders to operate, the valve is relying on the bar separator to manually control, (through the filter and lubricator to output, according to customer requirements);The drum is used to transfer the wire or cable to the tension mechanism.

Adjust the synchronization of the cable and the motor (pay-off and strander) through the tension mechanism of the pay-off and the following components:An inclined swing rod (supporting wire wheel) is controlled by a cylinder and is completed by a pressure regulating valve and pressure gauge (output via filters and lubricators - according to customer requirements).An automatic stop device implemented by a proximity switch (when a wire or cable is broken);The speed of the motor is controlled by the proximity switch, the CAM sensor of the pendulum fulcrum and the logic switch in the electrical box.A conductor wheel on a swing rod, with ceramic coating in the groove;The electrical control panel is installed in the box and fixed on the machine. The window next to it ensures the air circulation and is well protected.