Drawing receive a volume control how and why
there are many factors that can appear this kind of situation, ON the one hand may be the device of control the power switch to the ON state, none at this time we should control the power switch to ON. May also be due to the last time the production process of wire break down the problem, or is caused by failing to reset after downtime, so at this time to reset can be solved. Another reason may be due to the wire drawing machine equipment scram button did not shut down, this time should be shut down this button. Or is due to frequency converter tripping unbootable. This time can reference frequency converter operation display panel shown in the above information, and then turn off the power, wait for 30 seconds after the restart. In addition, also may be due to the wire drawing machine equipment running too fast, resulting in wire fracture; Or problems with the quality of the wire itself, should replace wire; The lubricant or use metamorphism, should change new, etc.
wire drawing machine has become a standardized way of dealing with cable making equipment.
HONTA COMPANY attaches great importance to customers and assists them in achieving their demands.
This is especially true when HONTA COMPANY have got a global business that's building bridges between manufacturers and customers across the globe.
Digging into our roots and acknowledging out heritage can be fruitful on both a high-quality and professional level of wire drawing machine.