HONTA focus on wire drawing machine and other wire machine since 2006. Pursue excellence, surpass ourselves.  Make Chinese wire machine serves world.

Interpretation of the drawing machine safety operation procedures

by:HONTA     2020-06-23

due to the development of social productive forces, and the rapid development of science and technology, more and more industrial system in the human life. In creating these industrial systems satisfy people material and spiritual life of the product at the same time, also brought huge risks to the safety of the people. Wire drawing machine operation safety has always been plagued and one of the persistent ailment which restrict the development of the industry and economy, is also a global one of the hot issues of mutual concern in the 21st century.

as China's economy has been rapid development and the level of industrial manufacturing, machinery and equipment needed for the industrial production more and more advanced, production automation degree increased significantly, thus greatly improving the production efficiency, this makes the wire drawing machine production technology and equipment is complicated, so the safety of the equipment is also becoming very close to, in order to avoid staff man-machine accidents occurred in the operation, to ensure the safety of people's life. ” Wire drawing machine product operation safety & quot; As well not unfamiliar words, cause the attention of people more and more widely. Below is the wire drawing machine operating instructions: machine tool electrical equipment grounding must be good, the two stroke collision block will only be a screw must be complete; Machine tool in the process of running, casual touches the handwheel is forbidden, handle and electric button, lest produce an accident; With the hand to touch the moving parts is prohibited. The worktable are not allowed to put tools and other items; Machine tool grinding wheel device by the belt cover device such as a security guard, must be intact, shall not be arbitrarily dismantled and shield all fixed screw should be composed tighten; When to start the grinding wheel, nobody may stand in the front wheel, so as to avoid some accidents happen; Repair or inspection machine, it must be cut off the machine power supply; Grinding wheel or wire drawing machine wire drawing knife feed, smooth, slowly, in order to ensure safety. The bed surface, straightening machine guide rail and so on should be frequently come on; Before start the machine tool, grinding wheel or wiredrawing knife should leave roller distance, all electric equipment should be in stop position, roller shaft sleeve, roller bearing and stroke collision block must adjust properly, and fastening; After drawing, exit the tool first, and then stop, the wire drawing machine of roller on the skids, temporarily not in use, should be coated with anti-rust oil.


As we have known for quite some time, the success of HONTA in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
HONTA COMPANY’s goal is to achieve customer satisfaction through excellence in design, supply chain management, manufacturing and repair solutions.
If we avoid overselling wire drawing machine cable making equipment and capabilities, you gain credibility and earn trust. We did not want to jeopardize our ingrained preference for humility.
HONTA COMPANY needs to ensure we're resolving customer issues as quickly as possible. By doing so, it leads to positive customer experiences and brand loyalty.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time. Company email:tlc@kshonta.com,tina.tian@jshonta.com