Better Touch Better Business
Contact Sales at HONTA.
wire drawing machine is also known as wire drawing machine, is used in the industrial application a wide range of machinery and equipment, widely used in machinery manufacturing, metal processing, petrochemical, plastics, wood products, wire and cable and other industries. Wire drawing machine can be divided into metal wire drawing machine, Used in the production of prefabricated metal parts such as standard parts) , plastic wire drawing machine, For the plastic products of polyester, nylon, polyethylene, polypropylene, polyester chip of the raw materials used for deep processing of special equipment for the production of hollow.
solid garden wire or flat wire) Bamboo filament, wire drawing machine, Used in production of wood products industry of chopsticks, toothpicks, barbecue bar to pull out the bamboo filament, such as processing special equipment) And so on. Wire drawing machine licensing requirements: safety regulations the operator must hold a wire drawing machine operation qualification certificate, it is strictly prohibited to operate on unmanned machines. The operator must be conducted in the designated equipment production and processing operations, it is forbidden to non-local staff for machine operation or a serial port operation. Operators must be familiar with basic technical parameters and performance index of the equipment. Operators must be devoted to duty, serious and responsible, proficient in equipment operation and maintenance. Operators must continue to summarize learning, and strive to improve their own quality. Safety operation, the operator must wear gloves to prevent the workpiece burn your fingers, affect the quality of the product. Carefully before starting the gas supply situation of equipment ( 5kg/cm2) , whether gas pipeline leakage, emptying the water in the air filter. Correct installation drawing ( The drawing within arrow direction and drum should be toward the direction of arrow) 。 Carefully check the upper and lower bearing seat and enhance screw good lubricity, sure no one can start at the front of the materials. Equipment should be immediately after start check belt swing within the required range, with or without abnormal phenomenon, otherwise should be adjust or shut down immediately. It is forbidden to wire drawing machine and dust catcher start at the same time, strictly prohibited operating personnel leave work. Artifacts are not directly delivered to the conveyor belt, conveyor belt, the wooden pallet directly control the workpiece is strictly forbidden, so as not to damage the conveyor belt and workpiece fly out of the wound. Two operations, the back of the equipment operation personnel is not in the wire drawing machine, the workpiece under the condition of the fly away. Wire drawing machine pressure regulation should be moderate, general pressure gauge should be in 35? Between 75, forbidden line, lest produce equipment or personal accident. Equipment under the normal operation of the strict adjustment of air pressure, in order to avoid the equipment damage due to wear personal accident. The abnormal phenomenon in the process of operation, the equipment should be immediately shut down, power outages, so as to avoid failure expansion. Equipment in the maintenance of total power should be shut, it is forbidden to run logo, avoid the accident. Get off work or equipment shall be in the total power and compressed air is closed to ensure the safety of the equipment.Copyright © 2019 HONTA. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.